Ar7000 Reference Manual; Basic Operation; Selection Of Basic Operating Mode; Audio Volume - AOR AR7000 Manual

4. Push the [RUN/BRK] key while scanning to pause the scan process. The scan will
stop and the legend "Brk" will be displayed on the LCD. Rotate the main dial to step
through the memory channels, a cursor (vertical dark band through the spectrum
display) follows your movement through the limits of the display window.
{figure 26}
5. Push the [ENT] or [ESC] key to return to the program scan menu to make changes
or to select a different scan group.
6. Push the [ESC] key to go back to the operating mode in use prior to program scan
selection.

AR7000 Reference manual

1. Basic operation

1.1 Selection of the basic operating mode
Push the [ key to advance the operating mode clockwise, VFO-A to VFO-B to
MEMORY to VFO-A..., push the [ key to select anti-clockwise.
{figure 27}
{figure 28}
{figure 29}

1.2 Audio volume

Push the [ ] key to increase the audio volume, push the [ ] key to decrease (lower)
the audio volume level.
{figure 30}

1.3 Key lock

Push the [K.Lock] key to lock the keypad of the radio, this is useful to prevent
accidental frequency change, the LCD legend "Lock" confirms operation. Push the
[K.Lock] key again to disengage the lock as a toggle.
{figure 31}

1.4 Squelch control

To set the squelch permanently open
Press the [SQL] key so that the "OPN" legend appears on the LCD followed by
[ENT].