Horizontal Scale; Vertical Scale - Yukon 26125T Operating Manual

RETICLE AS A RANGEFINDER
The range finder reticle in your Sentinel G2+ was designed to assist you in determining the range of
your target. The range can be determined using marks (chevrons) on horizontal line as well as bars on
vertical line of the reticle.
Note: To utilize this feature, the Sentinel G2+ needs to be sighted at 50 meters (55 yards).

HORIZONTAL SCALE

If a 0.35 meter (13.7 inch) wide target fits between the two closest center marks on the horizontal line
of the reticle, the target is 50 meters (55 yards) away. If the same target fits between the marks located
just beneath the horizontal line of the reticle, the target is 100 meters (110 yards) away. If the same
target fits between the marks located above the horizontal line of the reticle, the target is 25 meters (27
yards) away.
Please see a drawing below.

VERTICAL SCALE

The four short horizontal bars are located on the main vertical line. If a 0.35 meter (13.7 inch) high
target fits between the top marks and the bottom mark right below the horizontal line, the target is 25
meters (27 yards) away. The other two horizontal bars on the vertical line correspond to 50 meters (55
yards) and 100 meters (100 yards) accordingly.
Note: If the determined range is 100 meters (110 yards), aim at the center of the target using the
horizontal bar below the center crosshairs.
Note: It is possible to select the color of the reticle of the Sentinel G2+. Red is best when used in clear
viewing conditions. Green is preferable for use when viewing is obscured.
MIL-DOT RETICLE
Your night vision riflescope Sentinel G2+ has a Mil-Dot reticle installed which helps you determine
distance to the target if you know its actual size.
The Use of a Mil-Dot reticle: