Design And Application - Yukon 26125T Operating Manual

DESIGN AND APPLICATION

The Sentinel G2+ night vision riflescope is intended for observation and shooting at dusk or during
nighttime hours. It is a passive starlight device, and in most conditions does not require an artificial or
IR light source. The Sentinel G2+ uses a high performance Gen.2+ image intensifier tube and features
a focusable objective lens. The incorporated IR Illuminator enhances riflescope's viewing ability in
complete darkness or in moonless and starless environment. Power supply, with the voltage
stabilization, works up to 70 hours using 2 AA batteries. Low batteries do not affect aiming ability.
Additional remote stabilized power supply was designed stabilized power supply was designed for
optimized power consumption, which ensures a consistent aiming point in conditions of continuous
power draw or drop in temperature. The Sentinel G2+ is a universal night vision scope, which is ideal
for Night observation and hunting.
USING THE SENTINEL G2+
The Sentinel G2+ was designed to provide many years of reliable service. To ensure longevity and
performance, it is necessary to follow all procedures and guidelines outlined in this manual.
WARNING: The Sentinel G2+ is not recommended for use with cartridges producing recoil
rating higher than 6000 joules or calibers in excess of 9/.375. The manufacturer's warranty will
be voided if damage is caused by caliber cartridges greater than 9/.375, hand made cartridges
or shooting from a smooth-bore barrel.
• Do not remove the lens cap in a lit area if the scope has been activated or if the eyepiece is
emitting a green glow.
• Exposure to bright light can damage the image intensifier tube (IIT).
• The scope has an IPX4 water resistance rating. It is water resistant and can be used in inclement
weather conditions.
• Do not attempt to repair or disassemble the scope!
• Clean the scope's optical surfaces only if necessary, and use caution. Remove dust and sand by
blowing air across the optic surface, then apply lens cleaning fluid for multi layered optics onto
a soft cloth or tissue and wipe carefully.
• Do not pour any fluid, including alcohol, onto the lenses directly. The scope can be used in
temperatures ranging from -30 °С to +40 °С. However, when it is brought indoors from cold
temperatures, due to uneven heating of external and inner parts condensation may appear - wait
1-2 hours before it disappears.
• Consult a qualified gunsmith if there is difficulty attaching the scope firmly to a rifle or if there
is uncertainty about the right type of mount. The weapon mount can be deformed or destroyed
by shooting with a riflescope that is not mounted correctly.