Garmin Zumo 550 Owner's Manual page 12

G S
ETTING TARTED
5: Install the zūmo
in the Mount
1. Plug the power cable
into the zūmo mount.
For a better seal,
tighten the screws on
the power connector.
2. Flip the lever up.
3. Flip the weather cap
down and under
(magnetic).
4. Place the zūmo into
the mount, and flip the
lever down.
5. Tighten the security
screw.
About the Security Screwdriver
Use the security screw to better secure
the zūmo to the mount. You can connect
the screwdriver to your key chain for
easy access.
6
zūmo mount
Power
cable
Security screwdriver
zūmo 500/550 Owner's Manual
Lever
Security screw