Connecting The Ac Adapter - Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz User Manual

Connecting the AC adapter

Attach the AC adapter when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from battery
power. The AC adapter can be connected to any power source supplying
from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adapter
to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.
Use of the wrong adapter could damage your computer. TOSHIBA assumes
no liability for any damage in such case. The output rating for the computer
is 15 volts DC.
1. Connect the power cord to the AC adapter.
2. Connect the DC output plug on the AC adapter to the DC IN input port
on the back of the computer.
3. Plug the power cord into a live wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.
Satellite M100
Connecting the power cord to the AC adapter
Connecting the adapter to the computer
Getting Started
3-5