Table of Contents
Advertisement
As you enter digits, Smart Dial searches for contacts that match. If you see the
number you want to dial, touch it to place the call immediately without entering the
rest of the number.
If you enter an incorrect digit, touch
touch and hold
Tip:
Touch
numbers or contacts. To browse through the filtered list, flick through the list or slide
your finger up or down the list slowly.
3. Touch Call to call the number.
4. To end the call, touch End call.
Call From Call History
1. From the Home screen, touch
2. Touch the Call history tab (
3. Touch an entry on the Call history list to place a call to that entry.
Note:
You cannot make calls from History to entries identified as No ID or Restricted.
Tip:
Touch and hold an entry in the Call history list to open the options menu where you
can select to view the contact information (if number is stored in People), edit the
number before you redial, send a text message, or delete the entry from the Call
history list and more.
Call From People
1. From the Home screen, touch
2. Touch the contact you want to call to open the Contact details screen.
3. Touch Call [number type] to place a call.
For additional information, see People.
Call Using a Speed Dial Number
Speed dial numbers let you dial numbers by touching and holding a single number on the
Phone keypad. See
Set Up Speed Dialing
1. From the Home screen, touch Phone to display the phone dialer's screen.
2. Touch and hold the speed dial key on the Phone keypad. The display confirms that you
have dialed the number when it shows "Dialing" on the upper right side of the screen.
Call a Number in a Text Message or Email Message
While viewing a text message or email message, you can place a call to a number that is in the
body of the message.
Phone
.
to close the Phone keypad and to see if there are more matching
> People.
).
> People.
for information on assigning speed dial numbers.
to erase it. To erase the entire number,
32
Advertisement
Table of Contents
