Dual Display - Kenwood TS-990S Manual

Fitted with dual TFT displays
for an intuitive situational understanding.
The combination of two displays, main and sub band, allows you to simultaneously
monitor the target signal and the surrounding area with minimal eye movement.

Dual display

Monitor the area surrounding the target signal with the main display
Main display
The main display shows basic information about
the frequency, mode, meter, and others functions, as
well as the on/off status of the other accessory func-
tions. You can also view internal parameter settings
and memory lists. In addition, it features a band
Main display example views
Waterfall view Equalizer view
scope function that allows you to monitor band sta-
tus. Execute fast sweeps with FFT processing using
DSP. Switch to different view modes such as water-
fall and reception/transmission equalizer views.
RTTY reception view
Sub band display monitors the target signal itself
The 3.5" TFT sub band display is located above the
main knob, which not only reduces eye movement in
reading the frequency, but also allows you to moni-
tor the target signal itself by displaying the demodu-
lated audio spectrum. In addition, filter effects can
Normal display Magnified frequency display
Dual frequency display Dual frequency display
Basic Screen
Single frequency display Single frequency display
with virtual dial
When you are in the mood for a change,
how about these display modes?
Main display
Analogue dial display
Wide dial display (Reception specific)
TS-930 type display TS-940 type display
HF/50MHz TRANSCEIVER TS-990S
be displayed on the easy-to-see sub band display,
allowing for intuitive operation. You can switch the
sub band display between the four different view
modes below according to your intention.
Simultaneous display
FSK mode
PSK mode
Touch-sensitive
main screen
Sub band display
Simply touch the main screen for
quick QSY.
Dual display
11