Cisco DCNM Configuration page 5

To view the job you just created, go to Backup > Jobs.
After a job has run, view the Status column for information about the process.
This image shows there are seven (7) switches on the fabric but only two (2) were backed up.
Go to Admin > Logs to view detailed information in the logs:
MDS−FABRIC−A#
2012.05.12 15:05:00
−−−−−−−Begin backup for switch: Static−5596−A−−−−−−−
2012.05.12 15:05:00
Skipping unlicensed Switch Static−5596−A
2012.05.12 15:05:00
−−−−−−−Begin backup for switch:F340.24.10−5548−1−x−−−−−−−
2012.05.12 15:05:00
Skipping non SNMP v3 Switch F340.24.10−5548−1−x
2012.05.12 15:05:00
−−−−−−−Begin backup for switch:MDS−FABRIC−A−−−−−−−
2012.05.12 15:05:02
copy running−config bootflash:172.18.121.66−120512−150501−R
Copy complete, now saving to disk (please wait)...
MDS−FABRIC−A#
2012.05.12 15:05:05
copy running−config bootflash:172.18.121.66−120512−150501−R
Copy complete, now saving to disk (please wait)...
MDS−FABRIC−A# copy bootflash:172.18.121.66−120512−150501−R
sftp://Jim@172.18.121 .71/172.18.121.66−120512−150501−R
Jim@172.18.121.71's password:
2012.05.12 15:05:06
Connected to 172.18.121.71.
sftp> put /bootflash/172.18.121.66−120512−150501−R
/172.18.121.66−120512−150501−R
Uploading /bootflash/172.18.121.66−120512−150501−R to
INFO [FM.WebReport]
INFO [FM.WebReport]
INFO [FM.WebReport]
INFO [FM.WebReport]
INFO [FM.WebReport]
INFO [FM.WebReport]
INFO [FM.WebReport]
INFO [FM.WebReport]