Restoring Factory Settings; Viewing System Information; Inserting And Removing Sd Cards - Garmin GPSMAP 400 Owner's Manual

Restoring Factory Settings

You can restore your unit to the original factory settings.
CAUTION: This procedure deletes any information you have
entered.
To restore factory settings:
1. From the Home screen, select Configure > System >
System Information.
2. Select Factory Settings.
3. Select Yes to restore all factory settings. Otherwise, select
No to cancel.

Viewing System Information

You can view your unit's software version, basemap version, and
unit ID number. You may need this information to update the system
software or purchase additional map data information.
From the Home screen, select Configure > System > System
Information.
GPSMAP 400 Series Owner's Manual
®

Inserting and Removing SD Cards

Your unit supports Secure Digital (SD) cards. Insert optional
BlueChart g2 Vision SD cards to view high-resolution satellite
® ™
imagery, and aerial reference photos of ports, harbors, marinas, and
other points of interest. Insert blank SD cards to transfer data such as
waypoints, routes, and tracks to another compatable Garmin unit or a
PC. The SD card slot is located on the bottom-right corner of the unit.
To insert the SD card, press it in until it clicks.
To remove the SD card, press in on the SD card. The card pops out.
G S
ettInG tarted