36
USB Configuration
Scroll to this item and press <Enter> to view the following screen:
Main
Advanced
USB Configuration
All USB Devices
Legacy USB Support
All USB Devices (Enabled)
Use this item to enable or disable all USB devices.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting toAudio
allows the system to detect the presence of the USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Press <Esc> to return to the Advanced Menu page.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Chipset
M.I.B III
Boot
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Using BIOS
Security
Save & Exit
Enabled/Disabled All USB
Devices
[Enabled]
[Enabled]
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit