Use Of Mounting Bracket - Fostex PM0.4d Owner's Manual

Personal active speaker system
Table of Contents

Advertisement

Usage de Monter le Support
<CAUTION>
When attaching a mounting bracket and installing the
PM0.4d into a wall, etc., we highly recommend that
the installation must be proceeded by professional
installers. Fostex will not be held liable for any ac-
cident or hazard due to the use of mounting bracket.
<AVERTISSEMENT>
P o u r u n e i n s t a l l a t i o n a v e c l a l y r e
d'accrochage d'un PM0.4d au mur, etc.,
recommandons fortement que l'installation
soit effectuée par des installateurs profes-
sionnels. Fostex ne sera nullement respon-
sable d'accidents ou risques déciulant de la
lyre d'accrochage.
<CAUTION>
When attaching a mounting bracket, please only use
the designated size / length of screws and securely
tighten them. If not, it will not only damage the com-
ponents inside, but it will bring serious hazard such
as fire, electric shock, drop of product and injury.
<AVERTISSEMENT>
Lors de la fixation de la lyre d'accrochage
veuillez n'utiliser que les vis de grandeur
et longueur spécifiées et s'assurer qu'elles
sont adéquatement vissées. Sinon, en plus
des dommages aux composantes internes
pouvant être encourus, divers risques tel
qu'incendie, décharge électrique, chute du
produit et blessure pourraient se produire.
p-10

Use of Mounting Bracket

The PM0.4d has 4 implanted nuts on the bottom that can be
used to install with a wall mounting bracket. Fix the bracket
using the proper size / length of screws. For handling the
bracket, follow the bracket instruction manual.
Le PM0.4d est muni de 4 écrous implantés à la
base et utilisables pour fixr une lyre d'accrochage
mural avec es vis de grandeur et longueur adé-
quate. Veuillez suivre les directives pour la man-
pulation de la lyre d'accrochage dans le manuel
d'instructions.
• Cross-section drawing (dessin del'échantillon)
Bottom plate
plaque inférieure
Bracket
Support
Recommended screw length (thickness of bracket: 1mm)
Longueur de la vis recommandée (épaisseur
de support: 1mm)
1mm
Bracket
Support
(M5-L8 screw is recommended.)
(La vis M5-L8 est recommandée.)
Implanted nut
noix implantée
Screw
vis

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents