Garmin Personal Navigator GPS 45XL Owner's Manual & Reference page 53

Garmin gps-45xl personal navigator owner's manual & reference gps-45xl
Table of Contents

Advertisement

Selecting Displayed Items on the Map Page
The rest of the map setup page lets you specify what
items are displayed or plotted on the map page. The first
four plot items may be turned on or off by selecting 'yes' or
'no' in the appropriate field:
• The 'rings' selection will display the three present
position range rings on the map.
• The 'route' selection will plot the straight leg lines
between waypoints of an active route and display all
route waypoint names.
• The 'nearest' selection will display the nine nearest
waypoints to your present position (not to the target
cursor on the map).
• The 'names' selection will display the waypoint name
for the nine nearest waypoints.
To turn a plotted item on or off:
1. Highlight the confirmation (Yes or No) field for the plotted
item and press
U
D
2. Use
and
Track Log Display
The track log option sets the number of points the unit
will attempt to display on the map page. The default setting
of 250 points provides good resolution with minimal screen
clutter. The maximum setting is 768 points. Once you've
reached the maximum number of track points, the older
points will be lost as new points are added. Note that
adjusting the track points displayed will not affect whether
or not the receiver records a track log or the ability to cre-
ate a TracBack route.
To enter a log setting:
1. Highlight to the 'track log' field and press
2. Enter a value in the 3-digit field and press
not want to display a track, enter '000'.
Track Log Setup Page
The track log setup page lets you manage the GPS
45XL' s tracking data. From this page, you can select
whether or not to record a track and define how it is
recorded.
E
.
to select 'yes' or 'no', and press
E
.
E
.
E
. If you do
Reference
Map &
Track Log Setup
Range Rings
On-screen range rings will
appear on the map when
the 'Rings' option is set to
the 'Yes' position.
Track Log
The track log option only
defines how many points
are displayed on the map.
Setting the value at 000 will
not prevent a track log from
being recorded.
49

Advertisement

Table of Contents
loading

Table of Contents