Garmin Personal Navigator GPS 45XL Owner's Manual & Reference page 39

Active Route Page
Once a route has been activated, the active route page
will appear, displaying the waypoint sequence of your route
with the estimated time enroute (ETE) at your present
speed and distance to each waypoint. As long as you are
navigating an active route, the active route page will
become part of the main page sequence of the unit.
The active route page will also allow you to change the
ETE field to display desired track (DTK) or estimated time
of arrival (ETA) for each leg. In addition you can also clear
or invert the active route.
To display DTK or ETA for each leg:
1. Highlight the estimated time enroute (ETE) field and press
E
the key.
U
2. Use the or
E
press the
The active route page also allows you to clear (stop nav-
igating) or invert the active route without using the route
definition page.
To invert a route from the active route page:
U
1. Press the
'INVERT?' prompt.
E
2. Press the
To clear the active route from the active route page
and stop route navigation:
U
1. Use the and
E
2. Press the
Editing Routes
Once a route has been created and stored, it can be
edited at any time, even if it is the active route.
To edit a route from the active route page or the route
definition page:
U
1. Use the and
want to edit and press
D
keys to select 'DTK' or 'ETA' and
key.
key once to move the field highlight to the
key to invert the route.
L
keys to select the 'CLEAR?' prompt.
key to clear the active route.
D
keys to select the waypoint you
E
.
Reference
Route
Navigation
Active Route Page
Whenever you have an
active route, the active route
page will appear in the
main page sequence after
the compass/highway page.
To edit or review a route
waypoint from the active
route page, highlight the
desired waypoint and press
ENTER.
35