Marking A Position - Garmin Personal Navigator GPS 45XL Owner's Manual & Reference

Marking a Position

Now that you've acquired a position, let's mark it as a
waypoint for future reference.
M
1. Press the
To mark a position, you must have obtained a 2D or
!
3D fix, or have the receiver in simulator mode. If
you try to mark a position without a position fix, you
will be alerted with a 'No GPS Position' message.
The mark position page will appear, showing the cap-
tured position and a default 3-digit waypoint name. Let' s
change the default name to something a little more mean-
ingful, like 'HOME'.
U
1. Press the
the 'save' field to the name field.
E
2. Press and
3. Press and hold the
until the letter 'H' appears.
R
4. Press the key once to move the character highlight to
the next character space.
5. Repeat steps 3 and 4 until the word 'HOME' is displayed.
E
6. Press to complete entry of the name.
D
7. Press the
'save' field.
E
8. Press the
position as a waypoint named 'HOME'.
The mark position page will now be replaced by the
position page (the page displayed prior to pressing the
M key). The 'HOME' waypoint is now stored in the GPS
45XL' s memory, and will remain there until you manually
remove it or clear the receiver's memory. For more on way -
point management, see pages 21-27.
key to capture and hold your position.
key twice to move the field highlight from
L
to clear the default waypoint name.
U
key to scroll through the alphabet
key once to return the field highlight to the
key to confirm that you want to save the
Getting Started
Marking a
Position
To save a waypoint with the
default three digit name,
simply press the ENTER
k e y. The GPS 45XL will
re t u rn to the page
previously displayed.
The arrow keypad is used
for all data entry. Use the
UP and DOWN keys to
select letters, numbers or
menu options; use the LEFT
and RIGHT keys to move
the cursor forward or back-
ward along the line.
11