Garmin GPS IIplus Owner's Manual page 41

Garmin owner's manual gps receiver gps ii+

Hide thumbs Also See for GPS IIplus:

Table of Contents

Reference Waypoints

To create a new waypoint manually without knowing its position coordinates,

you'll need to enter its bearing and distance from an existing waypoint or your pre-

sent position.

To create a new waypoint by referencing a stored waypoint:

1. From the waypoint definition page, highlight 'NEW?', and press ENTER.

2. Enter a waypoint name, and press ENTER.

3. Highlight the 'reference' field (Fig. 35a), and press ENTER.

4. Enter a reference waypoint name (Fig. 35b) (or leave the field blank to use your present

position), and press ENTER.

5. Enter the bearing and distance of your new waypoint from the reference waypoint.

6. Press ENTER to confirm the 'DONE?' prompt.

Reference

Fig. 35a

Fig. 35b

Table of Contents

Show Quick Links

Table of Contents