Advertisement
Congratulations..
We appreciate your choice of DCM Time Domain In-Wall and In-Ceiling Series speakers. Properly in-
stalled and operated, they should provide years of worry-free listening pleasure. It's important that you
follow each step in the mounting directions on the mounting template and the recommendations in this
guide carefully to insure proper installation.
Features..
•
12dB/octave highpass crossover
•
6dB/octave lowpass crossover
•
Laminated steel core inductors prevent distortion
•
Neodymium tweeter magnet material
•
Teteron dome tweeter material
•
Kevlar woofer cone material with rubber surround
•
Debris resistant woofer basket
•
Aimable swivel tweeter (except TD622C and TD822C)
•
Aluminum grille
•
Air core highpass inductors
•
Input binding posts accept up to 8 gauge wire
Painting Your Loudspeakers..
DCM Time Domain In-Wall and In-Ceiling Series speakers are designed to accept all types of interior
and exterior paints. Spray or roller application should provide excellent results. A paint shield is included
with all DCM speakers to protect the drivers during the painting process. The cloth inserts in the grilles
should be removed before the speakers are painted. They should be placed back in the grilles after the
paint is dry.
Loudspeaker Placement..
DCM Time Domain In-Wall and In-Ceiling Series speakers are designed to work within any interior deco-
rating scheme. They can be installed in virtually any location where flush mounting is possible. To maxi-
mize their acoustical performance, however, certain guidelines should be followed. For the best stereo
reproduction the two loudspeakers should be placed an equal distance from your listening position and
separated so that the angle between them, at the listening position, is between 40 and 60 degrees. See
Figure 1 and Figure 2.
Figure 1
Figure 2
NOTES
Advertisement
