MULTIQUIP MP2050E1 Operation Manual page 9

Mp2 series
Hide thumbs Also See for MP2050E1:
Table of Contents

Advertisement

MP2 MASONRY SAW — SAFETY MESSAGE ALERT SYMBOLS
WARNING - Accidental Engine Starting
ALWAYS place the engine ON/
OFF switch in the OFF position,
when the saw is not in use.
WARNING - Over Speed Conditions
NEVER tamper with the factory
settings of the engine governor or
settings. Personal injury and damage
to the engine or equipment can result
if operating in speed ranges above
maximum allowable.
CAUTION - Respiratory Hazard
ALWAYS wear approved respiratory
protection that complies with ANSI-
Z87.1.
CAUTION - Sight and Hearing Hazards
ALWAYS wear approved eye and
hearing protection that complies
with ANSI-Z87.1
CAUTION - Equipment Damage Messages
Other important messages are provided throughout this
manual to help prevent damage to your concrete saw,
other property, or the surrounding environment.
MQ MP2 MASONRY SAW — OPERATION MANUAL — REV. #2 (3/12/13) — PAGE 9
HAZARD SYMBOLS - Gasoline Powered Models
WARNING - Lethal Exhaust Gases
Engine exhaust gases contain
poisonous carbon monoxide. This
gas is colorless and odorless, and
can cause death if inhaled. NEVER
operate this equipment in a confined
area or enclosed structure that does
not provide ample free flow air.
WARNING - Explosive Fuel
Gasoline is extremely flammable, and
its vapors can cause an explosion if
ignited. DO NOT start the engine near
spilled fuel or combustible fluids. DO
NOT fill the fuel tank while the engine
is running or hot.
DO NOT overfill tank, since spilled fuel could ignite if
it comes into contact with hot engine parts or sparks
from the ignition system. Store fuel in approved
containers, in well-ventilated areas and away from
sparks and flames. NEVER use fuel as a cleaning
agent.
NOTE
This saw , other property, or
the surrounding environment
could be damaged if you do
not follow instructions.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mp2050e3Mp2090hp

Table of Contents