Garmin GPS 75 Owner's Manual page 12

Pressing GOTO/MOB once allows you to initiate the GOTO
function, setting an instantaneous course to any waypoint
(see Section 3.7).
initiate the Man Overboard function, setting an immediate
course to the captured position (see Section 3.9).
Pressing AUTOSTORE allows you to capture your present
position instantaneously (see Section 3.6).
Pressing NAV selects the Navigation Pages which allow you
to view navigation information and the Plot Page (see Section
3.8).
Pressing WPT selects the Waypoint Pages which allow you
to create, edit, delete, and rename waypoints.
you may view nearest waypoints or proximity waypoints
(see Sections 3.4, 3.5 and Chapter 5).
Pressing RTE selects the Route Pages which allow you to
edit, review, activate, and delete routes (see Chapter 4).
Pressing either of the arrow keys allows you to move
the cursor, scroll through information lists, and enter
letters of the alphabet.
The alphanumeric keys allow you to enter letters and
numbers.
letter or number.
Pressing this key while the cursor is not on a numeric or
alphanumeric field allows you to change the backlight level.
There are two backlighting levels.
Pressing CLR erases information in the cursor field.
cursor is over a cyclic field, pressing CLR will toggle through
several available options.
Pressing ENT confirms an entry or selection.
Pressing GOTO/MOB twice allows you to
Use the arrow keys to select the desired
In addition,
If the
2-3