Diagnostic Information; Start - Lexmark 7200 Color Jetprinter Service Manual

4092

2. Diagnostic Information

Use the error indicator table, symptom tables, service checks, and
diagnostic aids to determine the failing part.

Start

Service error indications show as a series of flashes of the Power
light. There is a pause between each series of flashes. If your printer
has an error indication, locate the series of flashes in the
Indicator Table" on page 2-2
the printer to clear the error indicator.
If an error indicator appears, go to the error indicator table and take
the indicated action for that error.
The printer also logs the last occurring error. If you think it may have
an intermittent error, or the error indicator lights have been cleared,
you can retrieve the error:
1. Run the
appears at the bottom of the page.
2. Run "Initialize Error Log" on page 3-3
may not be the result of a current error).
3. Run the
"Power-On Self Test (POST) Sequence" on page
"Print NVRAM Contents" on page
"Test Page" on page
and take the indicated action. Unplug
to clear the error (the error
3-7. If no error appears, go to
Diagnostic Information 2-1
"Error
3-6. The last error
2-2.