GE JKP20 Owner's Manual page 23

www.GEAppliance_oom
Possible Causes What To Do
Oven thermostat • See the Adjust the oven thermostat--Do it yourself!
needs adjustment, section.
A fuse in your home may * Replace the fuse or reset the circuit breaker.
be blown or the circuit
breaker _-ipped.
Oven controls improperly set. • See the Using the oven section.
The oven temperature • Allow the oven to cool and reset the controls.
is too high to set a
self-clean operation.
Oven controls improperly set. * See the Using the serf-cleaning oven section.
This is the sound of the • This is normal.
metal heating and cooling
during both the cooking
and cleaning functions.
Excessive soil. • Press the CLEAR/0FF pad. Open the windows to rid
duriag clean cycle
the room of smoke. Wait until the LOCKEOlight goes
oil Wipe up the excess soil and reset the clean cycle.
Oveadoorwillaot Oven too hot. • Allow the oven to cool below locking temperature.
clea_ cycle
P
Oven controls improperly set. • See the Usingthe serf-cleaningoven section.
Oven was heavily soiled. • Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
utocgoooR'flashes The self-clean cycle *' Close the oven door.
lathe display has been selected but
the door is not closed.
LOCKED light is on The oven door is locked " Press the CLEAR/OFFpad. Allow the oven to cool.
when you want to cook because the temperature
inside the oven has not
dropped below the
locking temperature.
23