Basic Operation - Daikin FTQ18PBVJU Operation Manual

In case of horizontal position.
3
5
4
8
6
1. Airfl ow duct (local procurement)
2. Power supply wiring and ground wire
through conduit
3. Refrigerant piping
4. Drain pipe
5. Air inlet
6. Remote controller
7. Transmission wiring
8. Controller wiring
9. Air outlet (local procurement)

BASIC OPERATION

COOL/HEAT/AUTO/FAN OPERATION
How to follow the operation manual
Operation procedure
Explains the sequence of
operation for the remote controller.
Operate the buttons according to
the procedure.
Operation
1
Display the main menu screen.
Main Menu 1/2
Air Flow Direction
Press
Operation screen Ventilation
Schedule
Schedule
Off Timer
display Celsius / Fahrenheit
Maintenance Information
Press Menu/OK button to display
Setting
Describes screens that the timer screen.
will be displayed on the
remote controller in
2
Before setting the schedule , the
operation.
Schedule
Clock has not been set. clock must be set.
Would you like to set it now?
If the clock has not been set, a screen
Yes No
like the one on the left will appear.
Setting
Press
press Menu/OK button.
The date & time screen will appear.
Date & Time
Year 2008
Set the current year, month, day, and
Month 01
Day 01
time.
Tuesday
12:00
A
Setting
Preparation
• For mechanical protection purposes, apply pow-
er to the outdoor units at least six hours before
starting the operation of the system.
7
2
9
1
7
Operation button
display
Displays the location of
buttons to be operated.
buttons to select
the main menu screen.
Yes
buttons to select and
OPERATION
1
Cool
Set to
Cool 74
F
Return Setting
• Press the Operation mode
selector button several
times until the desired
mode Cool, Heat, Fan, or
Auto mode is selected.
* Unavailable operation modes are not dis-
played.
NOTE
• Before changing the mode, confi rm that the
display does not indicate master controlled sta-
tus. Both heat and cool mode may not be select-
ed if the unit is master controlled.
2
On/Off
nu
K
• Press On/Off button.
The Operation lamp (green)
will illuminate and the sys-
tem will start operating.
3
Cool
Set to
Cool 74
F
Return Setting
• The setpoint will increase
by 1°F (or 1°C) when
button is pressed and de-
crease by 1°F (or 1°C)
when button is pressed.
* Setpoint is not available in fan or dry mode.
English