Name of Parts
Remote Controller
Signal transmitter
•
To use the remote controller, aim the
transmitter at the indoor unit. If there
is anything to block signals between
the unit and the remote controller,
such as a curtain, the unit will not
operate.
•
Do not drop the remote controller. Do
not get it wet.
•
The maximum distance for
communication is approximately 23ft
(7m).
FAN setting button
•
Selects the airfl ow rate setting.
POWERFUL button
•
POWERFUL operation.
7
Receiver
Page 14
Page 16
HEAT PUMP model
COOLING ONLY model
Display (LCD)
•
Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
TEMPERATURE
adjustment buttons
•
Changes the temperature setting.
ON/OFF button
•
Press this button once to start
operation.
Press once again to stop it.
Front cover
•
Open the front cover.
ARC452A12
ARC452A14
Page 12
Page 11
Page 8