Care and Cleaning
Front panel
1.
Remove the front panel.
•
Open the front panel.
•
Slide the front panel to either the left or right and
pulling it toward you.
This will disconnect the rotation dowel on one side.
2) Pull
1) Slide
•
Disconnect the front panel shaft on the other side
in the same manner.
CAUTION
•
When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
•
When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
•
After cleaning, make sure that the front panel is securely fi xed.
21
Front panel shaft
2) Pull
1) Slide
2.
Clean the front panel.
•
Wipe it with a soft cloth soaked in water.
•
Only neutral detergent may be used.
•
If you wash the panel with water, wipe it with a dry
soft cloth, and allow to dry in the shade.
3.
Attach the front panel.
•
Align the front panel shaft on the left and right of
the front panel with the slots, then push them all
the way in.
Front panel
shaft
Slot
•
Close the front panel slowly. (Press the panel at
both sides and the center.)