Daikin BRC7E618: BRC7E619 Operation Manual page 11

Wireless remote controller kit
Hide thumbs Also See for BRC7E618: BRC7E619:
Table of Contents

Advertisement

DISPLAY appears and the
air flow direction continu-
ously varies. (Automatic
swing setting)
Press AIR FLOW DIREC-
TION ADJUST button to
select the air direction of
your choice.
DISPLAY vanishes the air
flow direction is fixed
(Fixed air flow direction
setting).
Adjusting left/right air flow direction
Angle the flaps to the left/
right from the knob, as
wanted or as needed to air
condition the room.
NOTE
• Stop flaps from swinging
before trying to angle
them. Working while the
flaps are moving may get your fingers
pinched.
MOVEMENT OF THE AIR FLOW FLAP
For the following conditions, micro computer
controls the air flow direction so it may be
different from the display.
Operation
Cooling
mode
• When operat-
ing continu-
ously at
downward air
flow direction
Operation
conditions
English
NOTE
Operate in the following order.
Press the TIMER MODE START/STOP
button several times and select the
mode on the display.
The display flashes.
For setting the timer stop .... "
Heating
For setting the timer start .... "
• When room
temperature is
higher than the
set temperature
Press the PROGRAMMING TIME but-
• At defrost
ton and set the time for stopping or
operation
starting the system.
(The flaps blow
horizontally to
avoid blowing
cold air directly
on the occupants
of the room.)
• If you try cooling or programmed drying,
while the flaps are facing downward, air
flow direction may change unexpectedly.
There is nothing wrong with the equipment.
This serves to prevent dew formed on parts
in the air discharge outlet from dripping.
• Operation mode includes automatic
operation.
PROGRAM TIMER OPERATION
• The timer is operated in the following two ways.
Programming the stop time (
.... The system stops
operating after the set time has elapsed.
Programming the start time (
.... The system starts
operating after the set time has elapsed.
• The timer can be programmed a maximum
of 72 hours.
• The start and the stop time can be simulta-
neously programmed.
TIMER MODE START/
1
TIMER
STO P
2
PROGRAMMING TIME
UP
DOWN
When this button is pressed, the
time advances by 1 hour.
UP
When this button is pressed, the
time goes backward by 1 hour.
DOWN
)
)
"
"
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brc7e619

Table of Contents