Panasonic SC-HC55DB Operating Instructions Manual page 7

2
Measure and mark the position of the wall
mount brackets (Both sides).
≥ Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
12.5 mm
Space required
48.5 mm
118 mm
3
Attach the wall mount bracket to the wall with 2
screws F. (Both sides)
≥ Use a spirit level to ensure both wall mount brackets are level.
≥ Use a screw which is strong enough to support the weight of at least
33 kg.
At least 30 mm
4 mm
4
Fix the safety holder D onto the unit with the
safety holder screw B.
≥ Before attaching, stick the rear pads (supplied) to A.
≥ Screw tightening torque: 80 N0cm to 120 N0cm.
229 mm
300 mm
89 mm
133 mm
139 mm
229 mm
480 mm
680 mm
7.5 mm to 9.4 mm
Wall mount bracket
Safety holder
screw B
5
Hang the unit on the wall.
Hook the unit securely onto the wall mount brackets.
≥ Connect the DAB antenna ([HC55]) or FM/AM antenna ([HC35]) and the AC
mains lead to the unit before hanging the unit onto the wall. (
≥ After hanging the unit, release your hand carefully to confirm the unit sits
securely on the wall.
6
Fix the safety holders E onto the wall mount
brackets with the safety holder screws C.
(Both sides)
≥ Screw tightening torque: 80 N0cm to 120 N0cm.
7
Drive the safety holder fixing screw G to
secure the safety holder D onto the wall.
≥ Refer to step 3 for requirements before screwing.
Wall
Safety holder
screw C
Safety holder E
Safety holder D
Fixed to the wall
Safety holder fixing screw G
4)
7