Table of Contents
Advertisement
[HC55] Using a Bluetooth
compatible device
About using Bluetooth
What is Bluetooth
?
®
Bluetooth
technology allows you to make a wireless
®
connection with another electronic device.
∫ Frequency band used
This unit uses the 2.4 GHz frequency band, however other devices may use this
frequency as well. To avoid interference with other wireless devices, please
follow the cautions listed below.
∫ Certification of this device
This unit conforms to frequency restrictions and has received certification based
on frequency laws, so a wireless permit is not necessary.
However, the following action is punishable by law in some countries:
≥ Taking apart/modifying the unit.
∫ Usage restrictions
≥ Wireless transmission and/or usage with all Bluetooth
not guaranteed.
≥ Compatible mobile phones capable of wireless transmission include and
comply to standards set by the Bluetooth SIG, Inc. However, if the mobile
phone is optimized to meet standard specifications, some functions may
work. Even so, depending on the specifications and settings of the mobile
phone, a connection may not be established, nor are the methods of
operation, display, or operation guaranteed.
≥ This unit supports Bluetooth
security features, however depending on the
®
operating environment and/or settings, this security may not be sufficient.
Use caution when transmitting data wirelessly.
≥ Please be aware that Panasonic accepts no responsibility for data and/or
information that may be compromised during a wireless transmission.
∫ Range of use
Use this device within an unobstructed 10 m range. The range of usage or
perimeter may be shortened depending on any obstructions, devices causing
interference, other people in the room, or the construction of the building.
Please note that the range mentioned above is not guaranteed.
∫ Effects from other devices
≥ It is possible that this unit may not operate correctly or you may experience
other effects of instability such as "broken up" audio, etc. when other devices
are placed within close proximity. Therefore, in order to prevent signal
interference, we recommend separating this unit from the following devices
during use:
Microwave oven/Wireless LAN/Electronic devices/Audio & Video devices/Office
Assistant machines & devices/Digital cordless phones/Fax machines, etc.
≥ If you live in close proximity to a broadcasting studio and the signal is too
strong, the unit may not operate correctly.
≥ When using a notebook PC with a wireless LAN transmitter, do not use this
unit and the wireless LAN at the same time.
≥ If you are still experiencing noise even outside of the 5 m range of a wireless
LAN device, turn the wireless LAN device off.
∫ Intended usage limitations
This unit is intended for normal, general use. This unit is not developed or
manufactured with the intention of use in "high safety"
occupations. Do not use this unit in these kinds of environments or occupations.
The following examples require extreme caution, and can directly result in
§
loss of life, or extreme bodily harm.
e.g.) Nuclear Engineering, and control of a nuclear reaction/automated control
of aircraft/air traffic control management/controlling movement of heavy freight
systems/control of life support or extension systems/control of weapons
systems and/or missile launch systems, etc.
Bluetooth
pairing
®
Preparation
Pair the Bluetooth
device with this unit to create an audio
®
connection.
1
Press [ , iPod] repeatedly to select
"BLUETOOTH".
When using it for the first time, it enters pairing mode
automatically.
®
2
While this unit is in pairing mode, access the
Bluetooth
execute a Bluetooth
(SC-HC55).
®
≥ Please refer to the Bluetooth
≥ If prompted for the passkey, enter "0000".
3
If pairing is successful, the paired device's
name will be displayed for 2 seconds. The
Bluetooth
ready to be used with the Bluetooth
≥ Make sure the Bluetooth
Profile).
≥ This unit supports the A2DP reception which is copyright-protected by
SCMS-T method.
≥ A2DP enables you to stream stereo sound from an audio source (mobile
phone, PC or laptop) to this unit via Bluetooth
≥ Depending on the specification or setting of mobile phones, connection may
not be established, or operation and display may vary.
equipped devices is
®
≥ You can register up to 6 devices into this unit. Disconnect the current
Bluetooth
≥ If you register more than the maximum device number, the oldest device in
connection history will be overwritten.
≥ If a registered device is re-registered, it will be overwritten.
Pair the Bluetooth
connection.
1
Press [ , iPod] repeatedly to select
"BLUETOOTH".
2
On the Bluetooth
Select this unit (SC-HC55) on the Bluetooth
setup screen to make the connection.
3
On the Bluetooth
Start playback of a music source.
≥ If the device is connected, the music will be heard on this unit.
≥ The Bluetooth
≥ Please refer to the Bluetooth
4
You can also make the following controls with
the remote control.
Play
Stop
Pause
Skip track
Display
or hazardous
§
information
≥ To utilise these functions, the Bluetooth
Video Remote Control Profile).
≥ This unit cannot transmit data to a Bluetooth
≥ When playing iPod/iPhone by Bluetooth
sound may be experienced if you leave the iPod/iPhone Bluetooth
screen active or when making Bluetooth
occurs, please exit the iPod/iPhone Bluetooth
≥ When playing music by iPod/iPhone via Bluetooth
iPhone is connected into this unit iPod/iPhone dock, the audio will not be
re-produced while "BLUETOOTH" is selected. Select "IPOD" to continue
enjoying the music.
menu of the Bluetooth
®
search to find this unit
®
further instruction on how to connect a Bluetooth
indicator lights up. The unit is now
®
device supports A2DP (Advance Audio Distribution
®
®
device and refer to "To register more devices" (
Basic play
®
device with this unit to create an audio
device:
®
device:
®
indicator lights when there is a connection.
®
device user manual if required.
®
Press [1/;] to start play.
Press [∫].
Press [1/;]. Press again to resume play.
Press [:] or [9].
Press [DISPLAY] repeatedly.
device and
®
device user manual for
®
device.
®
device.
®
.
®
18).
®
device must support AVRCP (Audio
®
device.
®
with the main unit, intermittent
®
menu
®
registration and connection. If this
®
menu screen.
®
connection and the iPod/
®
17
Hide quick links:
Advertisement
Table of Contents
