Manual Conventions; On-Screen Messages - Garmin Astro Dog Tracking System Owner's Manual

Default–the saved factory settings. You can change the
settings, but you can revert to the factory settings by
Restore Defaults.
selecting
Wizard–an on-screen guide to performing functions that
require multiple steps and options.

Manual Conventions

In this manual, small arrows (>) indicate that you
should highlight a series of items on the screen using the
Rocker, and press the ENtER key after each item. For
example, if you see "select
Dog, press ENtER, highlight
ENtER again.
Using the Status Bar
The status bar at the top of each Astro 220 page provides
status information.
Status Bar
Astro Dog Tracking System Owner's Manual
Dog > Show Info," highlight
Show Info, and press
• –indicates the remaining battery power.
• –appears when the Astro 220 is powered by an
external source.
• –indicates the strength of acquired
satellite signals.
• –blinks when the unit detects a signal (for
example, a DC 30) on the channel it is receiving.

On-Screen Messages

When an on-screen message appears, press ENtER to
acknowledge the message and close the window.
Messages also indicate temporary conditions, such as
"Calculating Route." The message window closes as soon
as the process is completed.
Getting Started