Static Route - ZyXEL Communications P-663HN-51 User Manual

Chapter 11 Routing
Table 40 Advanced Setup > Routing > Default Gateway (continued)
LABEL
Use Interface
Save/Apply

11.2 Static Route

The ZyXEL Device usually uses the default gateway to route outbound traffic from
local computers to the Internet. To have the ZyXEL Device send data to devices
not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL
Device's LAN interface. The ZyXEL Device routes most traffic from A to the
Internet through the default gateway (R1). You create one static route to connect
to services offered by your ISP behind router R2. You create another static route
to communicate with a separate network behind a router (R3) connected to the
LAN.
Figure 54 Example of Static Routing Topology
A
R3
116
DESCRIPTION
To have the ZyXEL Device use a specific WAN interface for sending
traffic to the default gateway, select this option and choose the WAN
interface from the drop-down list box.
Click this button to save the changes and have the ZyXEL Device start
using them.
LAN
WAN
R1
R2
P-663HN-51 User's Guide