Calibrating The Electronic Compass - Garmin GPSMAP 76CSx Owner's Manual

To turn the electronic compass on or off:
1. Press and hold the PAGE key to turn the
electronic compass on or off. The Compass
icon appears in the status bar when the
electronic compass is on. When you are not
using the electronic compass, turn it off to
conserve batteries. When it is turned off, the
unit uses the GPS receiver for navigation.
2. Hold the GPSMAP 76CSx level to get an
accurate electronic compass reading. A "Hold
Level" message appears if you are not holding
the electronic compass correctly, or if it is
not calibrated. (See the following page for
calibration instructions.)
Setting the speed and time for Compass
Auto On/Off:
1. Press MENU twice to open the Main Menu.
2. Highlight Setup, and press ENTER to open
the Setup Menu.
3. Highlight the Heading icon, and press ENTER
to open the Heading Setup Page.
4. Highlight the Switch to compass heading
when below field, and press ENTER.
GPSMAP 76CSx Owner's Manual
Time delay
options
Heading Setup Page
5. Use the numeric keypad to enter a speed.
6. Highlight the for more than field, and press
ENTER to set the time delay from the time
options list.

Calibrating the Electronic Compass

When you first use the GPSMAP 76CSx or after
you install new batteries, you have to calibrate the
electronic compass outdoors. The accuracy of the
electronic compass is adversely affected if the unit
is not held level or you are near objects that generate
magnetic fields, such as cars or buildings.
M P > C P
AIN AGES OMPASS
Speed
setting
AGE
49