Changing The Navigation Settings; Changing The Bluetooth Settings - Garmin 610 Owner's Manual

Changing the Navigation Settings

To change the navigation settings, on the Menu page, touch
Route Preference—touch a preference for calculating your route.
Vehicle—touch your vehicle type to optimize routes.
Avoidances—touch
to avoid on your routes. The nüvi uses these road types only if alternative routes take
you too far out of your way or if no other roads are available. If you have an FM
traffic receiver, you can also avoid traffic incidents.
Attention Tone—turn on or off the attention tone.
Voice Prompts—select when you want the nüvi to announce route navigation and
system status.

Changing the Bluetooth Settings

To change the Bluetooth settings, on the Menu page, touch
Connections—select a device to connect to. Select
mobile phones with Bluetooth
Me, Discoverable, or Visible, and then touch OK. The nüvi searches for all Bluetooth
wireless devices in the area and lists them. Select your phone, and then touch OK.
Enter the nüvi's PIN in your phone.
NOTE: The nüvi's PIN code (or passkey) is 1234.
nüvi 610/660 Owner's Manual
Enabled
to access the road types. Select the road types you want
wireless technology. Set your mobile phone to Find
®
C
USTOMIZING THE NÜVI
Settings
Settings
Add Device
to search the area for
> Navigation.
> Bluetooth.
43