Changing The Navigation Settings; Bluetooth Technology Settings; Restoring All Settings; Clearing User Data - Garmin zumo 500 Owner's Manual

C
USTOMIZING THE ZŪMO
Screen Shot—enable Screen Shot mode.
Touch the camera icon to take a
picture of the screen. The picture bitmap
file is saved in the Garmin\scrn folder
on the "Garmin" drive.
Changing the Navigation
Settings
From the Menu page, touch >
Navigation.
Route Preference—select a preference
Faster
for calculating your route. Select
Time to calculate routes that are faster
to drive but can be longer in distance.
Select Shorter Distance to calculate
routes that are shorter in distance but can
take more time to drive.
34
Vehicle Type—specify your vehicle type
to optimize routes.
Avoidances—select the road types you
want to avoid on your routes. The zūmo
uses these road types only if alternative
routes take you too far out of your way
or if no other roads are available. If you
have an FM traffic receiver, you can also
avoid traffic incidents.
Attention Tone—turn on or off the
attention tone.
Restore—restore the original navigation
settings.
Bluetooth Technology
Settings
From the Menu page, touch >
Bluetooth.
Connections—select a device to connect
to. Select Add Device to pair with
a mobile phone that has Bluetooth
®
wireless technology. See pages 14–17.
zūmo 500/550 Owner's Manual
Touch Change if you want to connect to
a different phone in the list. Select your
phone, and touch OK.
NOTE: The zūmo's PIN code (or
passkey) is 1234.
Drop—select the phone you want to
disconnect, and touch Yes.
Remove—select the phone you want
to delete from the zūmo's memory,
and touch Yes.
Bluetooth—enable and disable the
Bluetooth component. The Bluetooth
icon appears on the Menu page if the
Bluetooth compnent is enabled. To
prevent a phone from automatically
connecting, select Disabled.
zūmo 500/550 Owner's Manual
C
USTOMIZING THE ZŪMO
Friendly Name—touch Edit to enter
a friendly name that identifies your
zūmo on mobile phones with Bluetooth
technology. Touch Done.
Restore—restore the original Bluetooth
settings. Restoring the Bluetooth settings
does not clear the pairing information.

Restoring All Settings

1. From the Menu page, touch .
2. Touch Restore.

Clearing User Data

CAUTION: This deletes all user-
entered information.
1. Hold your finger on the lower-right
corner of the zūmo's screen while
turning on the zūmo.
2. Keep your finger pressed until the
pop-up window appears.
3. Touch Yes to clear all user data.
All original settings are restored. Any
items that you have saved are erased.
35