Wiring Diagram - Garmin GPSMAP 60 Owner's Manual

Interface formats are selected from the Interface Setup on page 46
of this manual. The input/output lines on your GPSmap 60 are RS-232
compatible, allowing easy interface to a wide range of external devices,
including PC' s , differential beacon receivers, marine autopilots and /or a
second GPS receiver.
The NMEA 0183 version 3.01 interface format is supported by the
GPSmap 60 and enables the unit to drive up to three NMEA devices.
NMEA 0183 Version 3.01 Approved Sentences:
GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG,
GPWPL, GPBOD
Garmin Proprietary Sentences:
PGRME (estimated error), PGRMM (datum string), PGRMZ (altitude),
PSLIB (beacon receiver control)
DGPS (Differential GPS) corrections are accepted in RTCM SC-104
version 2.0 format through the 'Data In' line. The Garmin GBR 21 is
the recommended beacon receiver for use with the GPSmap 60. Other
beacon receivers with the correct RTCM format may be used, but may not
correctly display status or allow tuning control from the GPS unit.
The USB Interface Cable provided with
this unit allows you to connect your GPSmap
60 to a PC-compatible computer' s USB port.
GPSmap 60
Appendices
Interface Wiring Diagram
(-) Ground
Data In
(+) Power
Unit Power/Data Port View
Data Out
79