Seagate FreeAgent Pro Classic User Manual page 15

.
Step 4: Holding the replacement interface module by its edges, lower it straight down into
.
Step 5: Lightly press the module into place using your thumbs until the edges of the
Step 6: Turn the screw clockwise with your fingers as far as you can.
Step 7: Use the coin to turn the screw clockwise no more than a final 1/4 of a turn. The
FreeAgent Pro Data Mover
Figure 2: Lift Module From Base.
the base:
Figure 3: Press Module into Base
module are flush with the base.
screw needs to be just tight enough to keep it snug against the base.
13