Setting Your Router's Time Zone - EnGenius ESR350 User Manual

Setting Your Router's Time Zone

Setup date and time syncronization on the ESR Series Router
with a computer or an Network Time Protocol (NTP) server.
To synchronize date and time settings with a computer, follow
these steps:
1. Select Synchronize with PC (computer) from the Time Setup
dropdown list. The date and time values are shown in the PC
Date and Time text field.
2. Click Prev to return to the previous screen, Apply to save the
settings, or Cancel to stop the procedure.
To synchronize the date and time settings with an NTP server,
follow these steps:
1. Select Synchronize with NTP Server from the Time Setup
dropdown list.
2. Select a time zone value from the Time Zone dropdown list.
3. Enter an IP address or domain name of an NTP server in the
NTP Server text field.
4. Click the Enable Daylight Savings check box to enable or
disable daylight savings time.
5. Select the date and time values when daylights savings
time starts in the Start Time dropdown lists.
31