General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Bosch ROS65VC Operating/Safety Instructions Manual

General Power Tool Safety Warnings

Read all safety warnings and all instructions.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

Work area safety
Keep work area clean and well lit.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Keep children and bystanders away while
operating a power tool.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges
and refrigerators.
Do not expose power tools to rain or wet
conditions.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use.
If operating the power tool in damp locations
is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply.
Personal safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of drugs,
alcohol or medication.
Use personal protective equipment. Always
wear eye protection.
Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and / or battery
pack, picking up or carrying the tool.
Remove any adjusting key or wrench before
turning the power tool on.
Do not overreach. Keep proper footing and
balance at all times.
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Power tool use and care
Do not force the power tool. Use the
correct power tool for your application.
Do not use the power tool if the switch does
not turn it on and off.