Table of Contents
Advertisement
Available languages
Available languages
Advertisement
Table of Contents
Related Manuals for Bosch ROS65VC
Summary of Contents for Bosch ROS65VC
-
Page 2: General Power Tool Safety Warnings
General Power Tool Safety Warnings Read all safety warnings and all instructions. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE Work area safety power tool. Do not use a power tool while you are tired or under the influence of drugs, Keep work area clean and well lit. - Page 3 Disconnect the plug from the power source Keep cutting tools sharp and clean. and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the power tool, accessories and tool bits etc. in accordance with these instructions, Store idle power tools out of the reach of taking into account the working conditions children and do not allow persons unfamiliar...
-
Page 4: Additional Safety Warnings
Additional Safety Warnings Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, Do not use AC only rated tools with a DC birth defects or other reproductive harm. power supply. Some examples of these chemicals are: Keep handles dry, clean and free from oil and grease. - Page 5 Symbols IMPORTANT: Symbol Name Designation/Explanation...
- Page 6 Symbols (continued) IMPORTANT:...
-
Page 7: Functional Description And Specifications
Functional Description and Specifications Disconnect the plug from the power source before making any assembly, adjustments or changing accessories Random Orbit Sander NOTE:... -
Page 8: Installing Accessories
Assembly BACKING PAD INSTALLATION INSTALLING ACCESSORIES Extra soft pad Soft pad Hard pad Attention:... -
Page 9: Dust Collection
BACKING PAD DAMPER NOTE: IMPORTANT: Dust Collection MICROFILTER DUST CANISTER REMOVING AND INSTALLING DUST CANISTER Your tool is equipped with To remove dust canister: a dust canister, empty it frequently, after completion of sanding and before storing the sander. To install dust canister:... - Page 10 CLEANING AND EMPTYING THE DUST CANISTER To empty dust the canister: NOTE: ATTACHING VACUUM HOSE SUCTION CONTROL...
-
Page 11: "Lock-On" Button
Operating Instructions TRIGGER "ON-OFF" SWITCH Switch Backing Grit Material setting size "LOCK-ON" BUTTON woods: metals: VARIABLE SPEED WITH DIAL SETTING paintwork:... -
Page 12: Tool Tips
FRONT HANDLE Tool Tips SELECTING SANDING DISCS REMOVAL OF SANDER POLISHING START OF SANDING SANDING ACTION SANDING SEQUENCE... -
Page 13: Tool Lubrication
Maintenance Service BEARINGS Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. Cleaning To avoid accidents always disconnect the tool from the power supply before cleaning or TOOL LUBRICATION performing any maintenance. - Page 15 Le contact avec un fil sous tension rendra également les pièces métalliques exposées de l'outil sous tension et causera des secousses électriques à l'opérateur.
- Page 27 El contacto con un cable que tenga corriente hará que ésta pase a las partes metálicas descubiertas de la herramienta y que el operador reciba sacudidas eléctricas.
- Page 40 2609932778...