Product Features; Important Safety Instructions For Battery Chargers - Black & Decker BDH1800S Instruction Manual

SyMBOLS
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................volts
Hz ................hertz
min ..............minutes
............direct current
................Class I Construction
(grounded)
................Class II Construction
(double insulated)

PRODUCT fEaTURES

figure a
1. On/Off switch
2. Release button
3. Dust bowl
4. Filter
5. Slide pack battery
6. Battery release button
7. Charger
8. Crevice tool
9. Brush tool
BaTTERy CaP InfORMaTIOn
figure B
Battery pack storage and carrying caps are provided for use
whenever the battery pack is out of the tool or charger. Remove
cap before placing battery pack in charger or tool.
waRnInG:
metal objects can contact exposed battery pack terminals. For example, do not place battery pack
in aprons, pockets, tool boxes, product kit boxes, drawers, etc. with loose nails, screws, keys, etc.
without battery cap. Transporting batteries can possibly cause fires if the battery pack terminals
inadvertently come in contact with conductive materials such as keys, coins, hand tools and the
like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit
transporting batteries in commerce or on airplanes (i.e. packed in suitcases and carryon luggage)
UNLESS they are properly protected from short circuits. So when transporting individual batteries,
make sure that the battery pack terminals are protected and well insulated from materials that
could contact them and cause a short circuit.

IMPORTanT SafETy InSTRUCTIOnS fOR BaTTERy CHaRGERS

SaVE THESE InSTRUCTIOnS: This manual contains important safety instructions for battery chargers.
• Before using charger, read all instructions and cautionary markings on charger, battery
pack, and product using battery pack.
waRnInG:
CaUTIOn:
& Decker batteries. Other types of batteries may burst causing personal injury and damage.
CaUTIOn:
supply, the charger can be shorted by foreign material. Foreign materials of a conductive
nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic
particles should be kept away from charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity. Unplug charger before
attempting to clean.
waRnInG:
other than the ones in this manual. The charger and battery pack are specifically
designed to work together.
• These chargers are not intended for any uses other than charging designated Black & Decker
rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.
• Do not expose charger to rain or snow.
SaVE THESE InSTRUCTIOnS
Do not store or carry battery pack so that
Shock hazard. Do not allow any liquid to get inside charger.
Burn hazard. To reduce the risk of injury, charge only designated Black
Under certain conditions, with the charger plugged in to the power
DO nOT attempt to charge the battery pack with any chargers
A ...................amperes
W ..................watts
................alternating current
n o .................no load speed
.................earthing terminal
................safety alert symbol
.../min or rpm..revolutions or reciprocation
A
7
3
8
9
3
per minute
1
2
4
B
6
5