Resetting The Router - Belkin F9K1107au 8820au00920 Rev. A00 User Manual

USING YOUR ROUTER
10. Click the "Update" button.
11. A prompt asking, "Are you sure you want to continue
with upgrading?" will appear. Click "OK."
12. A second prompt will open telling you the Router will not
respond during the upgrade and warning you not to remove
the power supply from the Router. Click "OK" once more.
Congratulations. The firmware has been updated successfully.

Resetting the Router

Reset Button
The "Reset" button is used in rare cases when the Router
may function improperly. Resetting the Router will restore the
Router's normal operation while maintaining the programmed
settings. You can also restore the factory default settings by
using the "Reset" button. Use the restore option in instances
where you may have forgotten your custom password.
Resetting the Router
Push and release the "Reset" button. The lights on the Router will
momentarily flash. The "Router" light will begin to blink. When
the "Router" light becomes solid again, the reset is complete.
Restoring Your Router to Factory Defaults
Press and hold the "Reset" button for at least 5 seconds,
and then release it. The lights on the Router will momentarily
flash. The "Router" light will begin to blink. When the "Router"
light becomes solid again, the restore is complete.
9