Update Sub Tab - Garmin GPSMAP 3206 Owner's Manual

Use the Advanced NMEA Setup Page to turn the GPS status (GSA, GSV),
Waypoint/Route (WPL, RTE), and the Garmin proprietary sentences on or off.
Check any other equipment's owners manual to see what sentences are required
to be enabled for functionality.
lat/lon Minutes Precision allows you to adjust the number of digits to the right
of the decimal point for transmission of NMEA Output, either 2, 3, or 4 digits.
Use the Waypoint ID setting to output the waypoint identifiers as names or
numbers.
Advanced NMEA Setup Page
To change Advanced NMEA settings:
1. Press the NMEA Setup soft key to open the Advanced NMEA Setup Page.
2. To change, enable, or disable NMEA output sentences, highlight the
sentence, and press ENTER to select or clear the check box. Only selected
sentences are output.
GPSMAP 3206/3210 Owner's Manual

Update Sub Tab

The Update sub tab shows the status of any software you are uploading to your
unit.
• Update—updates software on your unit.
• Prepare Card—updates software for devices on the Garmin Marine
Network. When selected, information about your network installation is
collected and saved to a data card. Use the data card with Marine Updater
on your personal computer to download software updates for your
system. Using Marine Updater, you can put all of the software updates on a
data card. When you put the data card into the unit it will update
the software for all devices on the network. Check the Garmin Web site
(www.garmin.com) for future updates and announcements.
M M > s t
aIn enu YsteM ab
6