Procedurec - Kenmore 580.73083 Owner's Manual

PROCEDURE C
N Remove the backing from the 13" shim strips
and attach them as shown below in Fig. 22.
The higher portion of shim is to be placed in
front of the rib on the base of wall sleeve.
1" high_
II 3/4"
High
FIG. 21
FIG. 22
_J Install the new unit into the wall sleeve
_'ITo assemble trim, snap the tab of each piece
into the slot of the other piece as shown below.
Slide trim over the front of the air conditioner
until trim is flush with sleeve as shown below.
I
Trim (2 ea)
Wall
FIG. 23
• Air conditioners coveredin this manual pose
an excessive weighthazard. Two or more
peopleare needed to move and installthe unit.
To preventinjuryor strain,use properlifting
and carryingtechniqueswhen movingunit.
• When handling the air conditioner,be careful
to avoidcutsfrom sharp metalfins on front and
rear coils.
• Make sure air conditioner does not fail during
removal.
-11 -