A Tutorial: Finding And Routing To A Restaurant - Garmin 2610/2650 Owner's Manual

Introduction
Where to find it
• To learn how to attach your vehicle
adapter to your StreetPilot, see page 64.
• Learn how to create and customize
routes, beginning on page 28.
• Learn more about GPS navigation
beginning on page 56.
• To find a city, address, intersection,
park, or other point of interest, see
Finding Places, beginning on page 19.
• To learn how to use the keypad on your
StreetPilot as well as the remote control
unit, see page 4.
• To change the street detail level on your
StreetPilot, see page 39 (map detail).
• If you do not want your StreetPilot to
automatically switch to "night" colors at
sunset, see page 39 (color mode).
• Learn about the Map page and its many
features, beginning on page 6.
vi

A Tutorial: Finding and Routing to a Restaurant

The tutorial below guides you through the steps for finding a restaurant in your area and then creating a
route to it. If you have never used a StreetPilot or a GPS navigation unit before, try this simple task. You'll
see that using your StreetPilot is fast and easy. Make certain you complete Step 2 on page iv before
you begin this tutorial. Otherwise, you will not be able to view restaurant names.
Step 1: If you have not already done so, attach the vehicle adaptor to your StreetPilot
and plug it in to your vehicle' s cigarette lighter. Turn on the StreetPilot so that it can find
satellites. When your StreetPilot has established a satellite fix, your screen should display a
"Ready to Navigate" message, as shown below:
Note: Make certain your StreetPilot' s view
is unobstructed as it looks for satellites.
For example, it cannot establish a satellite
fix if your vehicle is parked in a garage.
Step 2: Press the FIND key on the
StreetPilot. The Find menu will appear:
press the FIND key
then, touch the Food
& Drink icon