Panasonic ST60 series Ehelp page 104

Support / FAQ
Care and Cleaning
3D Eyewear
II 2_v_ear
° Clean using a soft, dry cloth.
° Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may
scratch the eyewear. Shake off any dust from the cloth before use.
° Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may
cause the paint to peel off.
° Do not dunk the 3D Eyewear in liquid such as water when cleaning.
° Avoid storing the 3D Eyewear in hot or highly humid locations.
° As the liquid crystal shutters (lens) are fragile and easily broken, be very
careful when cleaning them.
211 (0700304)