Garmin GPSMAP 198C Owner's Manual page 83

To set an alarm:
1. Use the ROCKER to highlight a sub tab.
2. Highlight the field you want to start, and press ENTER.
3. Change the mode to the setting, and press ENTER.
4. Highlight the next field to the right, press ENTER, enter
settings, and press ENTER to finish.
5. If you want the alarm to appear and beep until
acknowledged, highlight the Persist box, and press
ENTER.
GPSMAP 198C Sounder Owner's Manual
M M > A T
AIN ENU LARM AB
If Persist is checked,
an alarm stays active
until acknowledged.
Press ENTER to
acknowledge an
alarm.
77