Audiovox HDP100 - Acoustic Research HD Powerlink Quick Start Manual

HD Powerlink
Quickstart Guide
Getting Started
The first thing to do is unpack, and check to make sure your kit
has all of the following parts:
a HDP100 Transmitter
b HDP100 Receiver
c
Two Stands
d
Four Bracket Screws
e
One Wall Mount Kit
· Wall mount bracket
· Two drywall screws
· Two drywall anchors
f
One 3' HDMI Cable
g
IR Extender Kit
h
Eight Attachable Feet
Make sure your home entertainment components satisfy the HD Powerlink system requirements. You need a...
Test The Units
Before installing the HDP100 transmitter and receiver,
test them to make sure they're linked.
er
a
• TV or monitor with HDMI input • Video source with HDMI output
A. Plug in both units in
the same outlet (any
working outlet).
B. Turn both units on. The
switches are on the back
panels.
Congratulations on your purchase of the AR HD Powerlink System, the HDP100.
This guide takes you through the steps to get started.
c
a
b
d
h
f
C. Within moments, the LINK
indicators on both the receiver and
transmitter units glow steadily. The
DATA indicators glow steadily, then
start pulsing. The units are linked
and ready to connect.
· Note: If the LINK and DATA indicators
do not illuminate (or if the LINK
indicator starts flashing), consult
the users guide for information on
resetting the units.
D. Turn both units off and unplug
them.
continues on back...
e
g