Table of Contents
Advertisement
Provided the Start button has not yet
been pressed, a wrongly selected
programme may be changed as
described below (if it has been
pressed, see "Cancelling a
programme"):
^ Turn the programme selector to the
required programme.
^ Select additional function DRYING
0 again if required (see "Selecting
an additional function").
^ Press the Start button 6.
The following additional function can be
selected:
^ 0 DRYING
may be selected as an additional
function as soon as the programme
has been selected (except with D
PRE-RINSE and 6 DRAIN). Drying is
phased over 10 minutes. The total
running time of the programme
lengthens accordingly.
The indicator light for the active
programme stage lights up during the
programme.
k
Reactivation
I
Pre-wash
l
Main wash
H
Interim rinse / Final rinse
c
Drying (additional function)
r
End of programme
(Programme parameters have
been reached)
The programme has ended when r
lights up constantly in the programme
sequence display and the Start
indicator light 6 has gone out. A "0"
appears in the middle of the display. All
the other indicator lights come on and
go out in sequence. At the same time a
buzzer sounds for a maximum of 30
seconds (standard setting). The buzzer
can be changed (see "Programming
special functions").
Use the ß button to call up the total
running time of a programme or the
actual temperature.
^ Press and release the
Note:
As the machine is fitted with an
electro-thermal door lock, the door can
only be opened if the
pressed in (see "Opening and closing
the door").
button.
button is
31
Advertisement
Table of Contents
