Miele DA 428-4 Operating And Installation Manual page 29

3 protective sheets
for use when fitting the tower.
1 exhaust connection for exhaust
ducting C 150 mm.
1 reducing collar
for exhaust ducting C 125 mm.
1 non-return flap
for fitting into the exhaust connection
on the motor unit (not needed for
recirculation mode)
Telescopic wall bracket
for securing the rangehood to the
wall.
Conversion kit for recirculation
mode
including directional unit and flexible
aluminium hose with clips (this is not
included, but is available as an
optional extra - see Technical Data).
6 screws 5 x 40 mm and
6 x S 8 plugs
for securing the wall bracket.
,
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the rangehood.
2 x M 6 self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
1 lever for dismantling the tower.
Installation instructions
Installation
29