Technical Reference; Log Descriptions - ZyXEL Communications NBG-460N User Manual

Chapter 21 Logs
Table 88 Maintenance > Logs > Log Settings
LABEL
Log
Send Immediate
Alert
Apply
Reset

21.6 Technical Reference

The following section contains additional technical information about the NBG-
460N features described in this chapter.

21.6.1 Log Descriptions

This section provides descriptions of example log messages.
Table 89 System Maintenance Logs
LOG MESSAGE
Time calibration is
successful
Time calibration failed
WAN interface gets IP:%s
DHCP client IP expired
DHCP server assigns%s
Successful WEB login
WEB login failed
Successful TELNET login
TELNET login failed
Successful FTP login
FTP login failed
NAT Session Table is Full!
Starting Connectivity
Monitor
Time initialized by Daytime
Server
260
DESCRIPTION
Select the categories of logs that you want to record.
Select log categories for which you want the NBG-460N to send e-
mail alerts immediately.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
The router has adjusted its time based on information
from the time server.
The router failed to get information from the time
server.
A WAN interface got a new IP address from the DHCP,
PPPoE, PPTP or dial-up server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the router's Web
Configurator interface.
Someone has failed to log on to the router's Web
Configurator interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the router via ftp.
Someone has failed to log on to the router via ftp.
The maximum number of NAT session table entries
has been exceeded and the table is full.
Starting Connectivity Monitor.
The router got the time and date from the Daytime
server.
NBG-460N User's Guide