LG 60LN5400 Owner's Manual

LG 60LN5400 Owner's Manual

Hide thumbs Also See for 60LN5400:

Advertisement

Life's Good
i!ii[;'
_,_E_ S MAMUAI_
LED
LG LED TV applies
LCD screen with LED backlights.
Please
read
this
manual
carefuDly
before
operating
your
set and
retain
it for future
reference.
60LN5400
P/NO:
MFL67651102
(1304-REVO0)
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG 60LN5400

  • Page 1 Life's Good i!ii[;' _,_E_ S MAMUAI_ LG LED TV applies LCD screen with LED backlights. Please read this manual carefuDly before operating your set and retain it for future reference. 60LN5400 P/NO: MFL67651102 (1304-REVO0) www.lg.com...
  • Page 2 MPORTANTSAFETY NSTRUCTONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your )roduct. Read these instructions, Keep these instructions, WARNING/CAUTION Heed all warnings, Follow all instructions, • Do not use this apparatus near water, TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
  • Page 3 MPORTANTSAFETY NSTRUCTONS • Protect the power cord from being walked on CAUTION concerning the Power Cord or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit from the It is recommended that appliances be placed upon a apparatus.
  • Page 4 • If you smell smoke or other odors coming from Do not attempt to modify this product in any way the TV, unplug the power cord and contact an without written authorization from LG Electronics. authorized service center. Unauthorized modification could void the user's •...
  • Page 5 MPORTANTSAFETY NSTRUCTONS • Dot Defect For USA and Canada The Plasma or LCD panet is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you're viewing the TV. Those dots are deactivated pixets and do not affect the This equipment has been tested and found to performance...
  • Page 6: Licenses

    In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download, LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such...
  • Page 7: Table Of Contents

    TABLE OFr CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS REMOTE CONTROL WATCHING LICENSES Turning the TV on for the first time OPEN SOURCE SOFTWARE NOTICE USING THE USER GUIDE TABLE OF CONTENTS SPECIFICATIONS INSTALLATION PROCEDURE MAINTENANCE Cleaning Your TV ASSEMBLING PREPARING - Screen, frame,...
  • Page 8 NSTALL/_{T ON PROCEDURE / ASSEMBL NG AND PREPAR INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. ASSEMBLING PREPARING Unpacking Check your product box for the following items.
  • Page 9 ASSEMBLNGANDPREPARNG Owner's Manual Power Cord Remote Control, Batteries (AAA) (See p. 26) Stand Screws Stand Screws Stand Body, Stand Base 3 EA, P5 x 25 4EA, M4x (See p. 13) (See p. 13) (See p. 13) Desk-mount Screw Cable Holder Ferrite Core (See p.
  • Page 10: Optional Extras

    Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed manufacturer's circumstances or policies. Sound LG Audio device...
  • Page 11: Parts And Buttons

    ASSEMBLNGANDPREPARNG Parts Buttons _Screen Speakers Buttons Power Indicator Remote Control Sensor Intelligent Sensor 1 ButtOn Description (/_. / V) Scrolls through the saved channels. / m) Adjusts the volume level. (OK®) Selects the highlighted menu option or confirms an input. (SETTINGS) Accesses the main menus, or saves your input and exits the menus.
  • Page 12 ASSEMBL NG AND PREPAR • Use at least two people to move a large TV. Lifting moving theTV • When transporting the TV by hand, hold the TV as shown in the following illustration. When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
  • Page 13: Setting Up The Tv

    ASSEMBLNGANDPAEPAANG Setting up theTV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Affaching sfand If you are not mounting the TV to a wall, use the following instructions to attach the stand.
  • Page 14 ASSEMBL NG AND PREPAR Mounfing on a fable Attach the TV to a table to prevent from tilting forward, Lift and tilt the TV into its upright position on a table. damage, and potential injury. - Leave a 10 cm (4 inches) (minimum) space from Mount the TV on a table, and then insert and tighten the the walt for proper ventilation.
  • Page 15 ASSEMBLNGANDPREPARNG The Kensington security system connector is located at (Depending on model) the rear of the TV. For more information of installation and using, refer o-" ..to the manual provided with the Kensington security ..°-" system or visit http://www.kensington.com. Connect Kensington security...
  • Page 16: Mounting On A Wall

    ..CAUTION • Disconnectthe power beforemoving orinstalling An optional wall mount can be used with your LG theTV, Otherwise electric shock may occur, Television. Consult with your local dealer for a wall • Ifyou install theTV on a ceiling o r slantedwall, it...
  • Page 17: Tidying Cables

    ASSEMBL NG AND PREPAR 1"7 Tidying cables Gather and bind the cables with the cable holder. Cable Holder CAUTION • Do not move theTV by holdingthe cableholder, as the cableholdersmay break,and injuries and damage tothe TV may occur,...
  • Page 18: Making Connections

    MAKNGCONNECTONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device's connection, refer to the manual provided with each device.
  • Page 19: Hdmi Connection

    MAKNGCONNECTONS Connecting to a receiver, Player, or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device, Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMi cable as shown in the following illustration.
  • Page 20 MAKNGCONNECTONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE • Connect the mobile phone tothe HDMI IN 2 (MHL) portto view the phone screen on the TV. •...
  • Page 21: Component Connection

    MAKNGCONNECTONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the externat device and the TV with a component cabte as shown in the following illustration. @NOTE • If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color.
  • Page 22: Composite Connection

    MAKNG CONNECT Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE mono VCR, connect L/MONO jack have the audio cable from the VCR the AUDIO...
  • Page 23 MAKNG C ONNECTONS Connecting NOTE • Use an HDMi connection for the best image quality. • Depending upon the graphics card, DOS mode video may not work if a HDMi to DVi Cabte is in use. • in PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness, if noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the...
  • Page 24 MAKNG CONNECTONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker, Digifal Opfical Audio Connecfion Transmits a digital audio signal from the TV to an external device, Connect the external device and the TV with the optical audio cable as shown in the following illustration.
  • Page 25 MAKNGCONNECTONS Connecting Device Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV. (*Not Provided)
  • Page 26 2,6 REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the {+_,and \_ ends to the label inside...
  • Page 27 REMOTE CONTROL 27 PICTURE Changes the image mode. INFO (D Shows information on the current program. SOUND Changes the sound mode. SETTINGS ....Accesses the main menu. QMENU Accesses the quick menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. OK®...
  • Page 28 28 WfiTCHNGTV WATCHING When the basic settings are complete, press the OK button. Turning the TV on for first time When you turn the TV on for the first time, Initial setting screen appears, Select a language and customize the basic settings, To turn the TV off, press the power button on the Connect the power cord to a power outlet, remote control.
  • Page 29 US NG THE USER GU DE USING USER GUIDE User Guide allows you to easily access detailed TV information. Press SETTINGS to access the main menus. Press the RED button to access the Customer Support menu. Press the Navigation buttons to scroll to User Guide and press OK.
  • Page 30 NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna Impedance 75 £2 60LN5400 MODELS (60LN5400oUA) 1,359 x 852 x 297 (mm) With stand Dimensions 53.5 x 33.5 x 11.6 (inches) (W x H x D) 1,359 x 799 x 67.2 (mm)
  • Page 31 SPEC F CAT ONS 31 Horizontal vertical Resolution Frequency (kHZ) Frequency (HZ) i70.09 640 x 350 31.466 i70.08 720 x 400 31.469 Video output ports 640 x 480 31.469 59,94 on DVD player 800 x 600 37.879 60,31 i60,00 1024 x768 46.363 i60.015 1360 x768...
  • Page 32 MANTENANCE/TROUBLESHOOTNG MAINTENANCE Cleaning Your Clean your TV regularly to keep it at peak performance and to extend the product lifespan. _\_ CAUTION • Before cleaning, turn the power off and disconnect the power cord and all other cabtes. • When the TV is left unattended or unused for a long time,...
  • Page 33 EXTEF¢NAL CONTROL DEVCE SETUP 33 EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information, please visit www.lg.com.
  • Page 35 Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE , The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed...
  • Page 36 For inquires or corrrrenls visilwwwlgcorr ol call; 1-800-243-0000 Corsurrer User 1-888-865-3026 U_A, Corr/rr ercial User 1-888-542-2623 CANADA www.lg.com model and serial numbers of the TV are located on the back and one sde of the TV. This productqualifesfor ENERGY STAR ntle...
  • Page 37 Life's Good EXTERNAL CONT DEVICE S£ Please read this manual carefully before operating the set and retain it for future reference, www.lg.corn...
  • Page 38 KEY CODES KEY CODES • This feature is not available for all models. Code Function Note C°de Function Note (Hexa) (He×a) Q.Menu R!C Button CH +, PR + R!C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R!C Button...
  • Page 39 • LGTV supports PL2303 chip-based (Vendor ID " 0x0557, Product ID " 0x2008) USB to serial converter which is not made nor provided by LG. • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 40 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. (TV) (PC) This connection can only be used for the following models: 55/47/39LN5450-UA,...
  • Page 41 EXTERNALCONTROLDEVICESETUP Communication Parameters • Baud rate " 9600 bps (UART) • Stop bit 1 bit • Communication code : ASCII code • Data length " 8 bits • Parity None • Use a crossed (reverse) cable. Command reference list ,COMMA"O!,COM A"02 COMMA.D1 OMMAND2 Hexadecima,) (Hexadecimal)
  • Page 42 EXTERNAL CONTROL DEVICE S ETUP Transmission / Receiving Protocol [Commandl][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV. (j, k, m or x) Second command to control the TV. [Command 2] [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 43 EXTERNALCONTROLDEVICESETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute I_ To control Power Off of the set. on, TV will not display OSD.
  • Page 44 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) _- To adjust the screen tint. _- To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu.
  • Page 45 EXTERNALCONTROLDEVICESETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 OF (Decimal: 0 ~ 9999)
  • Page 46 EXTERNAL CONTROL DEVICE SETUP 20. Control Back Light (Command: m g) [Data Ol][Data 02]: Major Channel Number Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data _- To control the back light. - 00 01 ~ 27 OF (Decimal: 1 ~ 9999) [Data 03][Data...
  • Page 47 EXTERNAL CONTROL DEVICE SETUP 22.3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) _- To change 3D option for TV. _- To change 3D mode for TV. [Data 00] 3D option Data Structure 00 : 3D Picture Correction [Data00]...
  • Page 48 Life's Good...

Table of Contents