Yamaha FX SHO: FX Cruiser Owner's Manual page 58

Features and functions
The following operation buttons are on the
right side of the multifunction information cen-
ter.
1 "Mode/Reset" button
2 "Start/Stop" button
To switch the display mode, push the
"Mode/Reset" button for less than 1 second.
The display mode changes in the following or-
der.
Compass → Average speed → Tripmeter →
Trip timer → Fuel consumption per hour →
Fuel consumption per kilometer/mile → Water
temperature → Air temperature
NOTE:
To switch the display units between kilome-
G
ters/liters/degrees Celsius and miles/gal-
lons/degrees Fahrenheit,
"Volt/Hour" button for at least 1 second,
within 10 seconds after the multifunction in-
formation center starts operating.
The "SPEED" indicator light blinks three
G
times if miles/gallons/degrees Fahrenheit
are selected as the display units when the
multifunction information center starts oper-
53
ating, or if the display units are switched to
miles/gallons/degrees Fahrenheit.
1 "Volt/Hour" button
2 "SPEED" indicator light
Compass
This display shows the current direction of the
watercraft using the 8 major compass points.
push the
NOTE:
The accuracy of the compass varies depend-
ing on the operating conditions. Use this func-
tion as a reference only.