EMU29480
Replacing fuse
If the fuse has blown on an electric start
model, remove the electrical cover, open the
fuse holder, and replace the fuse with a new
one of the proper amperage.
EWM00630
WARNING
Be sure to use the specified fuse. An in-
correct fuse or a piece of wire could allow
excessive current flow. This could cause
electric system damage and a fire hazard.
NOTE:
Consult your Yamaha dealer if the new fuse
immediately blows again.
Trouble Recovery
4
2
2
1. Electrical cover
2. Fuse holder
3. Fuse (20 A × 2, 30 A × 2)
4. Spare fuse (20 A, 30 A)
5. Fuse puller
1. Fuse puller
EMU29522
Power trim and tilt / power tilt will not
operate
If the engine cannot be tilted up or down with
3
1
5
ZMU04279
1
ZMU04280
79